Neue Herbold - Profile Granulators LP Series and Pipe Granulators SR Series

Applications
Neue Herbold SR + LP series granulators are designed and manufactured for the size reduction of full length profiles and pipes eliminating the need to pre-cut the material into shorter lengths. The 6000 mm (20ft.) profiles or pipes are fed horizontally into the granulator. Generally the LP series granulators are used for the size reduction of PVC profiles and the SR series granulators are used for applications ranging from profiles to extremely thick walled PVC, PP and PE pipes. The SR series granulators are designed for most difficult applications, to achieve higher through put rates and insure a safe and reliable method of profile and pipe size reduction.

Design
SR + LP series granulators are designed with rotor and stator knives that are counter angled to each other producing a true scissors type cutting action. This design results in a cleaner more uniform granulate and reduced heat build up in the regrind and subsequently in the granulator. Double angle cut also reduces noise emissions and energy consumption. All knives are straight sharpening and require no special knife sharpening fixture. All cutting knives are pre-adjusted to the proper size gap outside the granulator by use of the knife setting fixture which creates a constant gap between rotor blade circumference and screen resulting in reduced friction and therefore less thermal stress of the material. Knife changes can be accomplished 60% quicker and safer then adjusting knives within the granulator. The bearings of the rotor shaft are mounted within solid steel housings (not castings) which offer more reliable service and eliminate any chance for the housings to crack or break under heavy shock loads. As opposed to flanged mounted bearings, outboard mounting prevents dust/fines from fouling the bearing nor grease from contaminating the granulate. Outboard mounting provides for a quieter and cooler operation. Improved rotor designs eliminate any chance for the rotor knives to lift or loosen during heavy shock loads. The knife bolts attach to a removable and replaceable threaded clamp. The rotor flights nor the knife carrier are threaded preventing unnecessary drilling and tapping to repair stripped threads. The rotor on the LP series is specially designed to immediately grasp the profiles and allow a literal automatic pull -in of the profiles into the grinding chamber therefore resulting in a effort free material feed. The SR series granulators are designed with a horizontal feed channel that is used as a material loading trough. The channel is equipped with a amperage load controlled material ram feeder which automatically controls and feeds the material to the grinding chamber The channel manufactured with a hydraulically operated channel lid which insures a completely closed environment and prevents any material fly-back during the size reduction process.

Advantages
- heavy duty design
- energy-saving size reduction
- low noise level due to double-cross
cutting knife configuration
- extremely high through put rates
- easy cleaning due to clam shell
opening characteristics
- reduced down time for rotor and
stator knife replacement due to
pre-adjusted knives

Neue Herbold Pipe Granulator type SR 800/600-A4-2

	A	Granulator
	B	Material gate
	C	Rope station
	D/E	Material trough
	F	Garage
	H	Rope drive Staion

type			type
Pipe Granulator type SR 450/600			Profile Granulator type LP 450/600
Pipe Granulator type SR 600/600			Profile Granulator type LP 450/1000
Pipe Granulator type SR 600/800			Profile Granulator type SP 300/300
Pipe Granulator type SR 800/600			Profile Granulator type SP 300/500
Pipe Granulator type SR 1200/800			Profile Granulator type SP 450/300
Pipe Granulator type SR 1600/1200			Profile Granulator type SP 450/600
			Profile Granulator type SP 600/600
			Profile Granulator type SP 450/1000