Neue Herbold GmbH - Granulators, Hammer Mills, Profilegranulators, Pulverizers, Washinglines, Shredder, RecyclingNeue Herbold GmbH - Granulators, Hammer Mills, Profilegranulators, Pulverizers, Washinglines, Shredder, RecyclingNeue Herbold GmbH - Granulators, Hammer Mills, Profilegranulators, Pulverizers, Washinglines, Shredder, Recycling

Neue Herbold - Granulators SM Series


Applications
 Neue Herbold SM series granulators are specially designed for all universal types of applications. Through simple modification the SM series granulators can be used for massive start-up lumps and purgings, massive profiles and general plastic scrap with extremely wall thicknesses. Also size reduction of voluminous hollow parts such as containers and crates. The SM series is designed for versatile use and considered a all round granulator for today’s recycler.

Design
 SM series granulators are designed with rotor and stator knives that are counter angled to each other producing a true scissors type cutting action. This design results in a cleaner more uniform granulate and reduced heat build up in the granulate. Double angle cut also reduces noise emissions and energy consumption. All knives are straight sharpening and require no special knife sharpening fixture. All cutting knives are pre-adjusted to the proper size gap outside the granulator with the use of the knife setting fixture which creates a constant gap between rotor blade circumference and screen resulting in reduced friction and therefore less thermal stress of the material. Knife changes can be accomplished 60% quicker and safer then adjusting knives within the granulator. The bearings of the rotor shaft are mounted within solid steel housings (not castings) which offer more reliable service and eliminate any chance for the housings to crack or break under heavy shock loads. As opposed to flanged mounted bearings, outboard mounting prevents dust/fines from fouling the bearing nor grease from contaminating the granulate. Outboard mounting provides for a quieter and cooler operation. Improved rotor designs eliminate any chance for the rotor knives to lift or loosen during heavy shock loads. The knife bolts attach to a removable and replaceable threaded clamp. The rotor flights nor the knife carrier are threaded preventing unnecessary drilling and tapping to repair stripped threads. The totally welded housing can also be equipped with replaceable wear plates when operating with high impact or abrasive material.
   
Advantages
- universal application useage
- reduced space requirement due 
  to compact design
- energy-saving size reduction
- low noise level due to double-cross 
  cutting knife configuration
- easy cleaning due to 
  “clam shell opening" characteristics
- higher through put rates
- reduced down time for rotor and 
  stator knife replacement due 
  to pre-adjusted knives

 Neue Herbold Granulator type SM 600/1000-G3-3
     Neue Herbold - data sheet Granulator type SM       Neue Herbold - data sheet Granulator type SM
 
Type A (mm) B (mm) C (mm) D (mm) E (mm)
Granulator type SM 300/300 920 1720 1130 290 500
Granulator type SM 300/500 903 1720 1330 490 500
Granulator type SM 300/800 903 1720 1630 790 500
Granulator type SM 450/600 1195 2190 1560 580 600
Granulator type SM 450/800 1268 2150 1875 780 600
Granulator type SM 450/1000 1167 2256 2075 980 600
Granulator type SM 450/1600 1380 2250 2675 1580 600
Granulator type SM 600/600 1440 2580 1650 584 720
Granulator type SM 600/800 1300 2580 1884 780 720
Granulator type SM 600/1000 1440 2580 2055 990 705
Granulator type SM 800/1000 1652 2890 2207 980 940
Granulator type SM 800/1200 1960 2680 2250 1150 940
Granulator type SM 800/1600 2051 2800 2840 1560 940
Granulator type SM 800/2000 1858 3264 3266 1970 940
Granulator type SM 800/2400 2160 2800 3400 2330 940


NEUE HERBOLD - HOME